14" X 40" POLAMCO ENGINE LATHE
PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $3,500.00

Stock # 14259
Serial # 0980-1135
Model: TUM35

Swing Over Bed: 14"
Swing Over Cross Slide: 8"
Distance Between Centers: 40"
Spindle Speeds: 28 to 2500 RPM
Spindle Nose: Camlock D1-4
Hole thru Spindle: 1.4"
Feed Range: (12) Longitudinal 0.0015 to .032 Thousandths Per Revolution
Feed Range: (11) Cross 0.0006 to .009 Thousandths Per Revolution
Thread Range: (40) Metric 0.2 to 36 MM Per Revolution
Thread Range: (42) Inch 1 to 76 Thousandths Per Revolution
Cross Slide Travel: 8-5/8"
Top Slide Travel: 4-1/2"
Tailstock Quill Travel: 4"
Tailstock Quill Diameter: 2-3/8"
Tailstock Quill Taper: #4 Morse

EQUIPPED WITH:
6-Position Turret Type Carriage Stop Unit (4 of 6 Screws Missing)
4-1/2" Diameter Dead Type Steady Rest
Bed Ways are Hardened and Ground, in Good Condition
Thread Chasing Dial
Inch - Metric Reading Dial on Cross Slide
Inch Only Reading Dial on Carriage Handle
Coolant Pump and Piping in Tailstock End of Machine
(1) Live Center (Needs New Bearings)
4-3/4" D4 Camlock Back Chuck Adapter (No Chuck)
4-1/2" Square Turret Type Tool Post (Clamp/Turn Handle Missing)
5 HP Main Drive Motor
Wired for 3 Phase, 60 Hz, 230/460 Volts
Presently Wired for 230 Volts

Overall Size: 89" L-R x 33" F-B x 54" High x 4,100 Lbs.

Hildebrand Machinery Co Inc
2023 Black Bridge Rd York PA 17402-1934
Tel: 717-846-2600 Fax: 717-845-9497
Email (Request Quote): sales@hildebrandmachinery.com
Web: www.hildebrandmachinery.com